Floor Mat Cleaner


You can save as much as $600-$1200 on each pound of soil by installing a well-maintained entryway matting system.

It can be time-consuming and expensive to remove dirt from floors in your facility. However, entry mats can significantly reduce dirt and help you save money.

By removing dirt and soil from guests’ feet, entry mats can prevent up to 90% of dirt entering your facility.

To be effective, however, entry mats should be clean.

Clean commercial entry mats will ensure your floors are completely protected from dirt and debris.

Mats that are too full of dirt, moisture, and other debris can make it difficult to remove dirt from shoes. Regularly cleaning your mats will ensure that soils are not tracked into your facility.

Your floors will remain clean and free from dirt. You will save money by not having to maintain dull or scratched floors as often.

Read more : art of zoo

This article and the video will show you how to clean commercial entryway mats to maintain your safety.

6 Steps to Clean Commercial Entry Mats

To ensure that moisture and debris are not collected throughout the day, your mats must be cleaned at the very least once per day.

Your area’s foot traffic may dictate how often you need to clean your entrance mats. You should clean your mats more often if your mats are stained or wet from shoes tracking in moisture.

Clean your commercial entry mats using a combination cleaning methods to ensure that they are properly cleaned.

Cleaning and Preparing

Before you begin any cleaning, it is important that you have all the necessary tools, supplies and PPE.


  • Vacuum for wet/dry or upright
  • Carpet extractor or wet/dry vacuum
  • Pump Up/Trigger Sprayer


  • Heavy Duty Cleaner and Floor Neutralizer
  • Carpet extractor rinse


  • Gloves
  • Safety goggles

As clean as possible, keep the floors of your facility.

See also : byford dolphin accident

Step 1: Take out the mats

Before you clean your mats, remove them from the floor. To remove dirt, lift the edges of the mat and roll it inward.

To avoid injury, two people should remove large or heavy entry mats.

If your mats are not attached to your floors, skip step 4.

Step 2: Vacuum or sweep under your mats

You should also clean the area where your mats are placed while you are cleaning them.

Sometimes dirt can build up under your mats. This dirt can cause your commercial floor mats to shift when people walk on them. Dirt can build up, and cause your mats to shift and move when people walk on them.

Unclean floors can cause damage due to dirt and other debris being thrown into the floors.

Use a vacuum or a broom to clean the floors in the entryway of your facility.

Step 3: Shake out the Mats

Commercial entry mats may have dirt or debris trapped in their fibers, or water dams (the protective boundary of your matting).

You can remove the dirt trapped in your mats by loosening them and taking it out.

To avoid soils from reentering your facility through foot traffic, make sure there is at least 25 feet between the mat being shaken out and your facility’s entrance.

Visit here : splatter ball gun

You can clean your mats by shaking them out.

You should not shake your mats too close to your building’s entrance or directly in front of your entryway. Dirt can easily re-enter your facility if dirt is left behind.

After you have shaken the mats, bring them back to your facility and vacuum them.

Step 4: Vacuum Mats

You can vacuum your entry mats to remove dirt and other debris.

To complete routine vacuuming in dry conditions, an upright vacuum can be used with a brush roll.

To avoid damage to your upright vacuum, it is best to use a dry/wet vacuum if it’s raining or snowing. The vacuums are not made to pick up moisture. They can also be damaged by wet soils.

Step 5: Clean the Entry Mats with a Carpet Extractor, if necessary

Your mats may need to be removed depending on their soil type and depth. It is unlikely that you will need to remove your mats each time you clean them.

You may have noticed that your carpets are retaining soils and stains, which is why it’s time to use a carpet extractor.

Make sure your mats are thoroughly vacuumed before you use a carpet extractor to clean them.

We will show you how to use a carpet extractor for cleaning your entry mats.

Also read : back to school necklace

Part 1: Apply carpet cleaner with a pump-up sprayer

You will need a pump-up sprayer for heavy-duty carpet cleaner to extract the mats. The correct dilution of a carpet cleaner is generally 1 oz per gallon of water. However, it is important to always read the product label before using.

Salt and ice melt can cause white salt swirls on your mats during winter. These swirls can be removed from your entry mats to reduce their appearance.

You can use a floor cleaner to clean your entry mats of salt and ice melt stains.

Part 2: Let Solution Dwell

After spraying the cleaning solution on the mat, allow it to sit for the desired dwell time. This usually takes several minutes.

Check the product label to determine the right dwell time.

Part 3: Rinse your Mats with the Carpet Extractor

After the solution has sat, you can use a carpet extractor filled with water and an extraction rinse.

You should not use a carpet extractor to remove floor neutralizer. This will prevent the neutralizer from settling and lead to ineffective cleaning.

You can find more detailed steps to remove ice from your mats in our article How To Remove Salt Stains and Ice Melt From Carpet in 6 Steps

Step 6: Dry the Entryway

Make sure your floors and mats are completely dry before you put them back on the floor.

You increase the likelihood of slip-and-fall accidents by putting mats on the floor before they are dry.

Mats can move or shift when placed on wet floors. Wet mat fibers can also cause shoes’ bottoms to collect moisture on your floors, creating a slip hazard.

An air mover can be used to speed up the floor drying process.

It is possible to increase soil buildup and staining by putting wet mats down early. Wet mats attract dirt more easily and provide a breeding ground for bacteria. The risk of mold, mildew and other odors can be increased by bacteria growth. It is important to clean your mats more often.

Last Thoughts

Your building’s entryways are the most used. Your building’s entry matting system will be more safe and cost-effective if it is well maintained.

Proper mat care will prolong the life of commercial entry mats as well as keep them functioning properly.

Commercial entry mats need to be maintained and cleaned at least once per day. However, this will depend on how much traffic they receive and the amount of soil buildup. Extra frequent cleaning is required for mats that are in high traffic areas or those with excessive soil buildup.

Clean your commercial entrance mats regularly to reduce soil removal costs. This will help keep your entryways safe and clean for all who enter your building.

Read more : crane safety toolbox talk