How to Reconnect the Netgear Extender to My Home Network

 

There are many instances when your Netgear extender gets disconnected from your home network. The reason may be a poor internet connection or incorrect hardware configuration. Due to this, you can’t have access to mywifiext So, you need to reconnect the Netgear extender to your home WiFi network. There are two ways of reconnecting your Netgear extender to your home network:

1. Ethernet mode

2. WiFi mode

Ethernet Mode

An Ethernet cable is used to connect the Netgear WiFi extender to your home network by Ethernet mode. Perform the following steps to use the Ethernet mode to reconnectthe Netgear extender to your home network.

1. Plug your Netgear WiFi extender into a working wall socket.

2. Switch on the Power button.

3. Wait for the LED lights to become stable.

4. Turn on your PC or laptop.

5. Launch a web browser of your choice.

6. Type mywifiext.net in the address bar of your web browser.

7. Press Enter.

8. The Netgear extender login portal will open.

9. Fill in the login details that you set earlier while performing Netgear extender setup..

10. Click Log In.

11. The Netgear Genie setup wizard will emerge.

12. Once logged in, go to the Setup option.

13. Look for the Wireless Settings option.

14. Once found, click on the Wireless Settings option.

15. You will be asked to provide the network password.

16. Click Apply after filling in the password.

Now, you can reconnect the Netgear WiFi extender to your home network.

WiFi Mode

To reconnect the Netgear WiFi extender to your home network, you can also use a WiFi connection. Follow these steps to reconnect the Netgear WiFi extender to your home network via the WiFi mode:

1. First of all, Reset your Netgear WiFi extender.

2. To reset the Netgear WiFi extender, press the Reset button on the Netgear WiFi range extender.

3. Hold the Reset button for few seconds before releasing it.

4. Once done, connect the extender and router via a WiFi network.

5. Switch on your computer or laptop, and launch an updated web browser of your choice.

6. Type mywifiext in the address bar of your web browser.

7. Press the Enter key after typing the complete web address.

8. The Netgear extender login page will appear on your screen.

9. Provide the login details that you entered while performing Netgear extender setup.

10. Click on the Log In button.

11. Follow the on-screen instructions to reconnect the Netgear extender to your home network.

Note: If you want to reconnect the Netgear extender to your home network using an Apple device, then use the local web address of the Netgear extender – mywifiext local

Points to Remember While Reconnecting the Netgear Extender to Your Home Network

• Always keep the Netgear extender and router in the same room.

• Keep your extender and router away from objects that act as WiFi interference devices. These objects may be fish tanks, mirrors, Bluetooth speakers, metal objects, etc.

• Cross-check the cable connections before reconnecting your extender to the home network, and don’t use a damaged Ethernet cable.

• Always plug your extender into a working wall socket.

• Make sure the Netgear extender is receiving enough power supply.

• Always use the updated version of your web browser to access mywifiext. It should also be free from browsing history, cache, and cookies.

• Update the firmware of your Netgear extender before reconnecting it to your home network.

Besides the above-mentioned things, many other things need to be taken care of while reconnecting the Netgear extender to your home network. So, it is necessary to keep an eye on them and avoid connection failure.

In the Nutshell

This was all about the steps to reconnect the Netgear extender to your home network. Also, keep a check on the important points mentioned in this article while reconnecting the extender to the home network. We hope that we have provided the best solution to your query. Feel free to drop the words of appraisal in the comment section.